What about sweater pilling?
1. Take a piece of light stone, like water skiing, gently slide over the sweater, remove a wool ball at once.
2. Can use transparent adhesive, and it is that kind of wide sticky good. Use tape to stick the wool balls on the clothes.
3. Dishwashing sponge, the best is to use new, cleaner and harder, the convex side of the sweater, just slide gently on the line.
4. Use a razor to gently brush the ball on the sweater. After a while, the surface of the sweater will be very smooth. It should be noted that in the process of shaving, do not use too much force, especially the newly purchased razor, if the force is too large, it is easy to cut the sweater when removing the pilling part.
5. There is a hair ball trimmer on the market, which can effectively remove the hair ball on the surface of clothes. This method is the most common method. There are sweater trimmers on the market. The price is not expensive, but the effect is good. The biggest advantage of using a sweater trimmer is convenience. Of course, attention should be paid to the arrangement of sweaters in the process of use. Because the speed of the cutter head of the sweater trimmer is fast, the sweater should be placed on the plane when cleaning the pilling part of the sweater, and the sweater should be trimmed after stretching the crease.
Reasons for sweater pilling
The pilling mechanism of sweater is: in the process of wool yarn processing and sweater wearing, under the action of various external forces such as friction and tension, the wool fiber in the wool yarn is easy to be hooked out to form a ring or single head detachment. After repeated friction, the wool fibers are tangled together to form a ball. The degree of pilling mainly depends on:
1. Spinning process control
Spinning mode, fiber properties and twist determine the amount of fiber protruding from the yarn surface. For low count wool products, it is often seen that there are thick and hard cavity hairs on the surface of the yarn, which is easy to pilling.
2. Materials for products
Low grade raw materials, short length, uneven fineness, high short wool rate, domestic wool, low count outer wool and other raw materials belong to this list.
3. Washing and dressing
The washing method of sweaters is sometimes an important reason for pilling. Products not marked with "machine washable" must be washed by "careful hand washing". It is not allowed to put them into the washing machine for the sake of saving trouble. Under the strong action of the washing machine, friction intensifies and pilling occurs. In general, the friction and pilling of elbow and two ribs are more obvious. From a certain point of view, pilling is the "twin" of whole wool products.
4. Fabric structure
Sweater products are knitwear, and the fabric density and the tightness of the loop structure also have an impact on the pilling of the sweater. Fabrics with smooth surface, such as plain knitted fabric and rib fabric, have better pilling resistance than those with uneven surface, such as fat flower fabric and striped fabric.
How to prevent the sweater from pilling
We often encounter this phenomenon, such as sweater pilling. Due to the particularity of clothing material, improper cleaning or care can easily lead to pilling. What to do after the sweater pilling? The following small make-up for you to deal with the best way of clothing pilling and prevent clothing pilling tips, so that your clothes perfect as new.
1. The sweater should be smooth inside and outside.
2. When using fine wool yarn (cashmere type), mercerized yarn and Tencel series yarn, the knitting density should be increased and the pattern structure should be reduced.
3. Nowadays, most sweaters are blended with wool and acrylic fiber, or wool and viscose fiber. Acrylic fiber is easy to pilling, viscose fiber is easy to electrostatic and easy to pilling, and wool itself will also slightly pilling, generally mercerized wool will not pilling.
4. Take apart and wash frequently, and weave it again every 2-3 years. When washing, use neutral detergent or soap powder, and the water temperature is below 50 ℃, do not rub and twist, and let it dry.
5. The use of neutral detergents, general alkaline detergents (ordinary washing powder, soap, etc.) will damage the fiber of cotton padded clothes. Therefore, the use of neutral detergents with softer and stronger decontamination ability (such as washing liquid) will protect sweaters as much as possible and reduce pilling of cotton clothes.
Anti pilling method for washing sweater:
1. When washing the sweater inside out, reduce the friction on the surface of the sweater, which can prevent the sweater from pilling.
2. Washing a sweater with shampoo will make it soft and natural.
